Search for: All records

Abstract Accretion disks around both stellar-mass and supermassive black holes (BHs) are likely often warped. Whenever a disk is warped, its scale height varies with azimuth. Sufficiently strong warps cause extreme compressions of the scale height, which fluid parcels “bounce” off of twice per orbit to high latitudes. We study the dynamics of strong warps using (i) the nearly analytic “ring theory” of Fairbairn & Ogilvie, which we generalize to the Kerr metric, and (ii) three-dimensional general-relativistic hydrodynamic simulations of tori (“rings”) around BHs, using theH-AMRcode. We initialize a ring with a warp and study its evolution on tens of orbital periods. The simulations agree excellently with the ring theory until the warp amplitude,ψ, reaches a critical valueψ_c. Whenψ > ψ_c, the rings enter the bouncing regime. We analytically derive (and numerically validate) that ${\psi }_{\mathrm{c}}\approx {(r/r_{\mathrm{g}})}^{-1/2}$in the non-Keplerian regime, wherer_g = GM/c²is the gravitational radius, andMis the mass of the central object. Whenever the scale height bounces, the vertical velocity becomes supersonic, leading to “nozzle shocks” as gas collides at the scale height minima. Nozzle shocks damp the warp within ≈10–20 orbits, which is not captured by the ring theory. Nozzle shock dissipation leads to inflow timescales 1–2 orders of magnitude shorter than unwarpedαdisks, which may result in rapid variability, such as in changing-look active galactic nuclei or in the soft state of X-ray binaries. We propose that steady disks with strong warps may self-regulate to have amplitudes nearψ_c. 

Recent radiation-thermochemical-magnetohydrodynamic simulations resolved formation of quasar accretion disks from cosmological scales down to ~300 gravitational radii $R_g$, arguing they were ‘hyper-magnetized’ (plasma $\beta \ll 1$supported by toroidal magnetic fields) and distinct from traditional $\alpha$-disks. We extend these, refining to $\approx 3R_g$around a BH with multi-channel radiation and thermochemistry, and exploring a factor of 1000 range of accretion rates ( $\dot{m}\sim 0.01-20$). At smaller scales, we see the disks maintain steady accretion, thermalize and self-ionize, and radiation pressure grows in importance, but large deviations from local thermodynamic equilibrium and single-phase equations of state are always present. Trans-Alfvenic and highly-supersonic turbulence persists in all cases, and leads to efficient vertical mixing, so radiation pressure saturates at levels comparable to fluctuating magnetic and turbulent pressures even for $\dot{m}\gg 1$. The disks also become radiatively inefficient in the inner regions at high $\dot{m}$. The midplane magnetic field remains primarily toroidal at large radii, but at super-Eddington $\dot{m}$we see occasional transitions to a poloidal-field dominated state associated with outflows and flares. Large-scale magnetocentrifugal and continuum radiation-pressure-driven outflows are weak at $\dot{m}<1$, but can be strong at $\dot{m}\gtrsim 1$. In all cases there is a scattering photosphere above the disk extending to $\gtrsim 1000R_g$at large $\dot{m}$, and the disk is thick and flared owing to magnetic support (with $H/R$nearly independent of $\dot{m}$), so the outer disk is strongly illuminated by the inner disk and most of the inner disk continuum scatters or is reprocessed at larger scales, giving apparent emission region sizes as large as . 

Abstract The conventional accretion disk lore is that magnetized turbulence is the principal angular momentum transport process that drives accretion. However, when dynamically important large-scale magnetic fields thread an accretion disk, they can produce mass and angular momentum outflows, known as winds,that also drive accretion. Yet, the relative importance of turbulent and wind-driven angular momentum transport is still poorly understood. To probe this question, we analyze a long-duration (1.2 × 10⁵r_g/c) simulation of a rapidly rotating (a= 0.9) black hole feeding from a thick (H/r∼ 0.3), adiabatic, magnetically arrested disk (MAD), whose dynamically important magnetic field regulates mass inflow and drives both uncollimated and collimated outflows (i.e., winds and jets, respectively). By carefully disentangling the various angular momentum transport processes within the system, we demonstrate the novel result that disk winds and disk turbulence both extract roughly equal amounts of angular momentum from the disk. We find cumulative angular momentum and mass accretion outflow rates of $\dot{L}\propto r^{0.9}$and $\dot{M}\propto r^{0.4}$, respectively. This result suggests that understanding both turbulent and laminar stresses is key to understanding the evolution of systems where geometrically thick MADs can occur, such as the hard state of X-ray binaries, low-luminosity active galactic nuclei, some tidal disruption events, and possibly gamma-ray bursts. 

Abstract A black hole (BH) traveling through a uniform, gaseous medium is described by Bondi–Hoyle–Lyttleton (BHL) accretion. If the medium is magnetized, then the black hole can produce relativistic outflows. We performed the first 3D, general-relativistic magnetohydrodynamic simulations of BHL accretion onto rapidly rotating black holes using theH-AMRcode, where we mainly varied the strength of a background magnetic field that threads the medium. We found that the ensuing accretion continuously drags the magnetic flux to the BH, which accumulates near the event horizon until it becomes dynamically important. Depending on the strength of the background magnetic field, the BHs can sometimes launch relativistic jets with high enough power to drill out of the inner accretion flow, become bent by the headwind, and escape to large distances. For stronger background magnetic fields, the jets are continuously powered, while at weaker field strengths they are intermittent, turning on and off depending on the fluctuating gas and magnetic flux distributions near the event horizon. We find that our jets reach extremely high efficiencies of ∼100%–300%, even in the absence of an accretion disk. We also calculated the drag forces exerted by the gas onto to the BH and found that the presence of magnetic fields causes the drag forces to be much less efficient than in unmagnetized BHL accretion. They can even sometimes become negative, accelerating the BH rather than slowing it down. Our results extend classical BHL accretion to rotating BHs moving through magnetized media, and demonstrate that accretion and drag are significantly altered in this environment. 

Abstract The angular momentum of gas feeding a black hole (BH) may be misaligned with respect to the BH spin, resulting in a tilted accretion disk. Rotation of the BH drags the surrounding spacetime, manifesting as Lense–Thirring torques that lead to disk precession and warping. We study these processes by simulating a thin (H/r= 0.02), highly tilted ( $\mathit{}=65°$) accretion disk around a rapidly rotating (a= 0.9375) BH at extremely high resolutions, which we performed using the general-relativistic magnetohydrodynamic codeH-AMR. The disk becomes significantly warped and continuously tears into two individually precessing subdisks. We find that mass accretion rates far exceed the standardα-viscosity expectations. We identify two novel dissipation mechanisms specific to warped disks that are the main drivers of accretion, distinct from the local turbulent stresses that are usually thought to drive accretion. In particular, we identify extreme scale height oscillations that occur twice an orbit throughout our disk. When the scale height compresses, “nozzle” shocks form, dissipating orbital energy and driving accretion. Separate from this phenomenon, there is also extreme dissipation at the location of the tear. This leads to the formation of low-angular momentum “streamers” that rain down onto the inner subdisk, shocking it. The addition of low-angular momentum gas to the inner subdisk causes it to rapidly accrete, even when it is transiently aligned with the BH spin and thus unwarped. These mechanisms, if general, significantly modify the standard accretion paradigm. Additionally, they may drive structural changes on much shorter timescales than expected inα-disks, potentially explaining some of the extreme variability observed in active galactic nuclei. 

Abstract X-shaped radio galaxies (XRGs) produce misaligned X-shaped jet pairs and make up ≲10% of radio galaxies. XRGs are thought to emerge in galaxies featuring a binary supermassive black hole (SMBH), SMBH merger, or large-scale ambient medium asymmetry. We demonstrate that XRG morphology can naturally form without such special, preexisting conditions. Our 3D general-relativistic magnetohydrodynamic (GRMHD) simulation for the first time follows magnetized rotating gas from outside the SMBH sphere of influence of radius R B to the SMBH of gravitational radius R g at the largest scale separation, R B / R g = 10 3 , to date. Initially, our axisymmetric system of constant-density hot gas contains a weak vertical magnetic field and rotates in the equatorial plane of a rapidly spinning SMBH. We seed the gas with small-scale 2% level pressure perturbations. Infalling gas forms an accretion disk, and the SMBH launches relativistically magnetized collimated jets reaching well outside R B . Under the pressure of the infalling gas, the jets intermittently turn on and off, erratically wobble, and inflate pairs of cavities in different directions, resembling an X-shaped jet morphology. Synthetic X-ray images reveal multiple pairs of jet-powered shocks and cavities. Large-scale magnetic flux accumulates on the SMBH, becomes dynamically important, and leads to a magnetically arrested disk state. The SMBH accretes at 2% of the Bondi rate ( M ̇ ≃ 2.4 × 10 − 3 M ⊙ yr − 1 for M87*) and launches twin jets at η = 150% efficiency. These jets are powerful enough ( P jets ≃ 2 × 10 44 erg s −1 ) to escape along the SMBH spin axis and end the short-lived intermittent jet state, whose transient nature can account for the rarity of XRGs. 

Stellar-mass black holes can become embedded within the gaseous disks of active galactic nuclei (AGNs). Afterwards, their interactions are mediated by their gaseous surroundings. In this work, we study the evolution of stellar-mass binary black holes (BBHs) embedded within AGN disks using a combination of three-dimensional hydrodynamic simulations and analytic methods, focusing on environments in which the AGN disk scale height H is ≳ the BBH sphere of influence. We model the local surroundings of the embedded BBHs using a wind tunnel formalism and characterize different accretion regimes based on the local properties of the disk, which range from wind-dominated to quasi-spherical. We use our simulations to develop prescriptions for mass accretion and drag for embedded BBHs. We use these prescriptions, along with AGN disk models that can represent the Toomre-unstable outer regions of AGN disks, to study the long-term evolution of the BBHs as they migrate through the disk. We find that BBHs typically merge within ≲5−30Myr , increasing their mass significantly in the process, allowing BBHs to enter (or cross) the pair-instability supernova mass gap. The rate at which gas is supplied to these BBHs often exceeds the Eddington limit, sometimes by several orders of magnitude. We conclude that most embedded BBHs will merge before migrating significantly in the disk. Depending on the conditions of the ambient gas and the distance to the system, LISA can detect the transition between the gas-dominated and gravitational wave dominated regime for inspiraling BBHs that are formed sufficiently close to the AGN ( ≲ 0.1 pc). We also discuss possible electromagnetic signatures during and following the inspiral, finding that it is generally unlikely but not inconceivable for the bolometric luminosity of the BBH to exceed that of the host AGN.